Getting started > 26L OADING PAPERCASSETTE TRAYS1. Remove the paper tray from the MFP.2. Fan the paper to be loaded at the edges (1) and in the middle (2) to ensure that allsheets are properly separated, then tap the edges of the stack on a flat surface tomake it flush again (3).3. Load paper long edge feed (LEF) (for letter headed paper load face down with topedge towards the right of the MFP) (1) up to mark (a).4. Adjust the rear stopper and paper guides (2) to the size of paper being used.NOTEFor A6 paper, remove the rear stopper and re-install in the A6 position.1 231a23
