24 Control Panel and Configuration MenuMACHINE SETTINGSpecify settings related to machine operations and displays by selectingMACHINE SETTING in the UTILITY menu.Auto Panel Reset For details on specifying settings, refer to thePrinter/Copier/Scanner User’s Guide on the CD.Energy Save ModeLCD ContrastKEY SPEEDLanguageBuzzer Volume Settings OFF / LOW / HIGHSelect the volume of alarms and the beep thatsounds when a key is pressed.Initial Mode Settings COPY / FAXSelect the mode that the machine starts up in orreturns to after the automatic reset.TONER OUT STOP Setting ON / ON(FAX) / OFFSelect whether or not printing, copying and faxingstop when the toner has run out.If ON is selected, printing, copying and faxing stopwhen the toner runs out.If OFF is selected, printing, copying and faxingcontinues even if toner has run out.Printing, copying and faxing can continue, however,the printing results are not guaranteed. If printing,copying and faxing are continued, the messageTONER LIFE END/ CHANGE X TONER appearsand printing stops.TONER LOW Settings ON / OFFSelect whether or not a warning message appearswhen the toner is nearly empty.Auto Continue Settings ON / OFFSelect whether to continue or stop printing if a papersize error occurs during printing. If ON is selected,printing continues, even if a size error occurs. If OFFis selected, printing stops if a size error occurs.DUPLEX SPEED For details on specifying settings, refer to thePrinter/Copier/Scanner User’s Guide on the CD.Calibration For details on specifying settings, refer to thePrinter/Copier/Scanner User’s Guide on the CD.
