48 Sending Faxes2 Check that LIST is selected, and then press the Enter key.The list of programmed speed dial numbers and group dial numbers is dis-played.3 Press the or key to select the desired destination, and then press theEnter key." If a destination was incorrectly selected, press the Back key, and thenperform the operation again from step 1.4 When EDIT=Select appears, press the Enter key again.5 Press the or key to select FINISH, and then press the Enter key." To erase the selected destinations, press the Stop/Reset key.Using the Search Function of the Phone BookIf a recipient is registered with a speed dial number or a group dial number, therecipient can be found by using the List or Search function of the phone book.Follow the procedure described below to search using the Search function of thephone book.1 Press the Address book key 4 times." The Address book key can be used if the main screen or Can UseAddressBook is displayed.2 Press the or key to select SEARCH, and then press the Enter key.A screen appears, allowing you to enter the text to be searched for.3 Using the keypad, enter the first few characters of the name programmed forthe desired recipient." Enter the name programmed in the speed dial number or the group dialnumber. For details on entering text, refer to “Entering Text” on page 97." Text up to 10 characters long can be entered.4 Press the Enter key.The number of names beginning with the text entered in step 3 is displayed." If no names beginning with the entered text are found, NOT FOUND is dis-played.
