35 Control Panel and Configuration MenuREPORTINGSpecify report settings by selecting REPORTING in the UTILITY menu.Activity Report Settings OFF / ONAfter every 60 transmissions/receptions, a report canbe printed to show the results of the transmissions/receptions. Select whether the report is printedautomatically when the 60th transmission/receptionis reached.TX Result Report Settings ON / ON(ERROR) / OFFSelect whether the report showing the result of atransmission is printed automatically after thetransmission is finished. ON: Prints the report after each transmission. ON(ERROR): Prints the report after a trans-mission only if an error occurred. OFF: Does not print the report after eachtransmission, even if an error has occurred.The transmission result report is normally printedafter a broadcast transmission.RX Result Report Settings ON / ON(ERROR) / OFFSelect whether the report showing the result of areception is printed automatically after the receptionis finished. ON: Prints the report after each reception. ON(ERROR): Prints the report after a recep-tion only if an error occurred. OFF: Does not print the report after eachreception, even if an error has occurred.
