42 Sending FaxesSending a Fax Using the Original Glass1 Press the Fax key to enter Fax mode." If the initial mode (UTILITY - MACHINE SETTING - INITIAL MODE) isset to FAX, this step can be skipped.2 Remove all documents from the ADF." If you are using the original glass to scan, do not load any documents intothe ADF.3 Lift to open the ADF cover.4 Place the original document face down on the original glass and align thedocument on the scales above and to the left of the original glass.5 Gently close the ADF cover." Closing it too quickly may cause the document to move on the originalglass." Take care not to trap your fingers when closing the ADF cover.6 Adjust the document image quality." For details on adjusting the document image quality, refer to “Adjustingthe Image Quality” on page 44.7 Specify the fax number of the recipient in one of the following ways:– Direct dialing– Using the favorite list– Using the Speed Dial function– Using the Group Dial function– Using the Phone Book functions– Using the Redial/Pause key" For details on specifying the recipient, refer to “Specifying a Recipient” onpage 45. For details on using the Redial/Pause key, refer to “Using theRedial Function” on page 49." A transmission can also be sent to multiple recipients with the Broadcastfunction. For details on sending a broadcast transmission, refer to “Send-ing a Fax to Multiple Recipients (Broadcast Transmission)” on page 49.8 Press the Start key.A screen appears, requesting confirmation of the scanning area.9 To scan the displayed scanning area, press the Enter key. The document isscanned.
