1 – 3Connecting to Your ComputerBefore you can use your printer, you need to attach it to your computer using aninterface cable.Notes: Interface cables are not supplied with the printer.Do not connect serial and parallel cables at the same time.1. Make sure both your computer and your printer are switched OFF.2. Attach the AC mains cable to the socket in the rear of the printer, and plug it intoan earthed power source.Note: Do not use an unearthed adapter with your printer. The printer mustbe connected to an earthed power supply.3. Plug the printer end of your interface cable into the connector at the rear of theprinter.4. Connect the other end of your interface cable to the printer port on your computer.Interface cableAC mains cable++
