Oki MICROLINE 591Elite User Manual

Also see for Microline 590: Product update Maintenance manual

Contents

2 – 16Setting Multi paper Interleaf Max. paper EnvelopeThickness1 - - - -2 1P 1P 0.10 -3 2P 2P 0.16 -4 3P - 0.20 -5 4P 3P 0.265 -6 5P 4P 0.33 o7 6P 5P 0.40 o8 6P 5P 0.40 o9 - - - oWait Time: Is the amount of time delay before the paper is automatically fed, usingthe top feed.Page Length Control: The printer can detect the page length by paper-end sensors ifthe Actual Page Length is chosen. Otherwise, the default value is set in the menu.Print Registration: Use this option with bidirectional bit image graphics to improveregistration. Although 0 is generally the best selection, choosing another value maycompensate for registration problems with some graphics software packages.Operator Panel Functions: Full Operation is the normal setting. Choose LimitedOperation to deactivate the PRINT QUALITY and CHARACTER PITCH buttons onthe control panel. Then you can control these features only through your software. Thiscan be useful when several people are using the printer and you do not want its settingschanged.Reset Inhibit:Choose YES if your software package or computer sends an initializationcommand at the start of each job. This initialization command will reset any featuresthat you may have set to the menu default.Print Suppress Effective: Select YES when you want the print suppress commandsin each of the emulations to be active. The print suppress commands are ignored whenthis option is set to NO.