1 – 10Printable AreaThe default top margin when using single sheets is 0.35 inch (8.89mm). However, thetop of form position can be adjusted by micro feed in steps of 1¦180 inches to a minimumposition of 0.02 inches (0.5mm) from the top edge of the paper.The bottom margin defaults to 0.5 inches (12.7mm) with Bottom Margin Valid set inthe menu. If this menu item is set to Invalid, the bottom margin will be controlled bythe Page Length setting, and will allow printing to a minimum distance of 0.02 inches(0.5mm) from the bottom edge of the page.Note: Care should be exercised to ensure that the correct page lengthsetting is selected when the Bottom Margin Invalid option is chosen, asoverprinting on to the platen roller could occur, damaging both theprinthead and the roller.tt0.5 inch bottommargin default(12.7mm)Printable area0.35 inch topmargin default(8.89mm)Additional AreaAdditional Area0.02 inchminimum(0.5mm)0.02 inchminimum(0.5mm)0.16inch(4.1mm)s0.12inch(3.0mm)t s+sssstss
