Oki ML3410 Handbook

Also see for ML3410: Reference guide

Contents

Installing the Optional Cut Sheet FeederInstalling the Optional Cut Sheet FeederA Cut Sheet Feeder (CSF) is ideal for high-volume printing using single-sheet paper. The CSFfeeds paper automatically, controlled from the printer•s front panel or from the computer.There are two cut sheet feeders available for the Pacemark 3410: the single-bin CSF 3001 and thedual-bin CSF 3002. Since both feeders are installed in the same way, we•ll illustrate theprocedure with the CSF 3001, noting any differences as they arise.Unpack your cut sheet feeder and make sure you have all the parts.- Cut Sheet Feeder- Bin rack (1 for the CSF 3001 and 2 for the CSF 3002)- Output tray1. Make sure the printer is off.2. Open the front cover.3. Remove the back cover: tilt it back slightly and lift it off.4. Push the bail lever forward to the open position and the paper lever back to the single sheetposition.5. Hold the cut sheet feeder over the printer.6. While fitting the CSF hooks over the platen shaft, gently lower it onto the printer.ML3410 ( 96-02-07 )