7. Unplug the bottom feed tractor cable and plug the CSF cable into the receptacle on the printer.The arrow on the plug faces up.8. Fit the wire rack(s) into the hole(s) on the back of the bins.9. Slide the output tray into the channels on the sides of the CSF.This is what the finished product should look like:ML3410 ( 96-02-07 )

chapter 1 setup

installing the platen knob

making connections

testing your printer

chapter 2 loading paper

rear feed continuous forms

setting top of form

changing paper types

chapter 3 operation

print mode

print quality

character pitch

Pacemark 2410 emulation commands

commonly used serial cable configurations

parallel cable

specifications

Oki ML3410 Handbook

ML3410

PACEMARK 3410


Contents chapter 1 setup installing the platen knob making connections testing your printer chapter 2 loading paper rear feed continuous forms setting top of form changing paper types chapter 3 operation print mode print quality character pitch Pacemark 2410 emulation commands commonly used serial cable configurations parallel cable specifications	7. Unplug the bottom feed tractor cable and plug the CSF cable into the receptacle on the printer.The arrow on the plug faces up.8. Fit the wire rack(s) into the hole(s) on the back of the bins.9. Slide the output tray into the channels on the sides of the CSF.This is what the finished product should look like:ML3410 ( 96-02-07 ) Previous Next / 78