Oki Microline ML380 Handbook

Also see for ML380: User guide Maintenance manual Parts Breakdown

%Loading Single SheetsLoading Single SheetsNote:If you have continuous-form paper in the printer and wish to switch to single sheets, use thepaper park feature described on page 27 to move the continuous-form paper out of the paperpath.1.Make sure the paper lever is toward the back, in the single sheet feed position.2.Swing the paper separator up into the single sheet feed position and lock it in place by pressingdown gently until the pins slide down into the wells on the printer.3.Reach behind the left paper guide, grasp the paper support arm and swing it up into place.4.Place a sheet of paper in the separator and slide the paper guides to adjust them for the sheetsize you will be using. The guides should just barely touch the edges of the paper. Be sure youtuck the bottom edges of the paper under the feed tabs on the guides.Note:The movement of the left guide is restricted. It should be positioned so that the paper coversthe groove in the left side of the platen. If it doesn't, the printer will signal paper out (SELECT lightflashing) even with paper installed.ML 380 ( 96-02-03 )