%Line Feed ControlLine Feed ControlThe line feed command (ASCII LF, decimal 10)tells the ML380 to print a line and then move the print positiondown one line on the page. The amount of vertical movement dependson the current line spacing (see above). This command also cancelsone-line double width printing.Use the ESC J n command toexecute fine line feeds in increments of 1/180-inch. Unlike thesimple LF code, the ESC J n code doesn't cancel one-line doublewidth printing. If you substitute 0 for the n, no line feed will beperformed.ML 380 ( 96-02-03 )
