Oki Microline ML380 Handbook

Also see for ML380: User guide Maintenance manual Parts Breakdown

%Double WidthDouble WidthUse these commands to produce characters twice as wide as regular characters. They can be used withany of the character pitches. For example, if the current pitch is 12 cpi, double width characters will printat 6 cpi. The "Character Width Values" table on page 74 shows all the possible combinations.Theone-line double width commands are especially convenient for titles and headlines, since they turn off thedouble width printing automatically at the end of the line. If you want to cancel one-line double widthprinting before the line ends, send the command DC4 or ESC W 0. You can also cancel one-line doublewidth printing with the command LF (see page 92) or ESC ! n (see page 81).nOTE: The DC4 command will have no effect if you have engaged double width printing with the ESC W1 or the ESC ! n command; in these cases, only the ESC W 0 or ESC ! n command will cancel doubleprinting.You can also use the ESC ! n command (see page 81) or the Menu Select Mode to choose continuousdouble width printing.ML 380 ( 96-02-03 )