Oki Microline ML380 Handbook

Also see for ML380: User guide Maintenance manual Parts Breakdown

%Installing the Ribbon CartridgeInstalling the Ribbon CartridgeYour printer ribbon is a cartridge type which pops in and out.Note:When you open the bag containing the ribbon cartridge, do not remove the clear plastic shieldmounted over the ribbon.1.Lift the access cover.2.Make sure that the bail is positioned against the platen (bail lever back). Grasp the black plasticsupport plate in front of the printhead and slide the printhead to a position between the bailrollers.Note:The printhead gets HOT during extended printing. Be sure to let it cool before you touch it!3.Hold the ribbon cartridge with the knob facing up and the ribbon/shield facing away from you.4.Insert the flat side of the cartridge (side closest to you) into the front of the support plate. Theslots on either side of the cartridge will engage the pins on the plate.5.Swing the ribbon cartridge down over the printhead and press until it snaps into place.6.Turn the knob in the direction of the arrow to take up any slack in the ribbon.To remove the ribbon cartridge, simply squeeze the tabs on either side and lift it out.ML 380 ( 96-02-03 )