%Cut Sheet Feeder ControlCut Sheet Feeder ControlThe following commands are active only when the Cut Sheet Feeder accessory is installed on the printer.Use the ESC EM I command to feed a sheet of paper from the cut sheet feeder to the top of formposition. If paper is already in the printer, the printer will eject the page and load another sheet. Any datathat is in the print buffer when this command is received will print before the paper is ejected andreplaced.The ESC EM R command instructs ML380 to print the data in the print buffer and eject thepage. A line feed code (see page 92) at the end of the page causes the next page to feed into the printerautomatically.Bit-Image GraphicsML 380 ( 96-02-03 )