Oki Microline ML380 Handbook

Also see for ML380: User guide Maintenance manual Parts Breakdown

%Skip Over PerforationSkip Over PerforationIf skip over perforation is set to Yes on the menu, the printer will automatically skip an inch from thebottom of one page to the top of form on the next page. Use the ESC N n command to change thenumber of lines skipped. The actual amount of space skipped between pages varies with the current linespacing; however, after you've set the skip size, it won't increase or decrease if you change line spacing.The ESC O command returns the perforation skip to its default.You can also use the ESC @ resetcommand (see page 107) to reset the perforation skip to the default. The skip over perforation feature willinterfere with page formatting controlled by software packages such as word processors. If you're using apackage that controls page length directly, you should set the Skip Over Perforation item in the menu toOFF.NoteML 380 ( 96-02-03 )