Calibrate SensorCommand Structure CAExample: CAPlacement: This command should be sent after the sensor type has beenselected with the CI command. It should not be includedwith print job commands.Default: There is no default for this command.Command Function To adjust the label sensor for unique media and ribbon combinations.Input to Printer ACI2CAZPrinter Output There is no printer output for of this command. It will cause the printer tofeed about 6 inches while the characteristics of the label backing or eye-mark are measured.Special Notes 1. The sensor is calibrated for the currently selected sensor type (Eye-Mark ortransmissive).2. The sensor must be recalibrated whenever the sensor type is changed or in-correct label detection occurs.3 When calibrating the sensor for the OKIPOS X400 Thermal Transfer unit operating inthe thermal transfer mode, the ribbon must be installed in the printer.88All manuals and user guides at all-guides.com
