- 91 -Printer MaintenanceCleaning the Fuser UnitThis section describes how to clean the variousparts of the fuser unit.This procedure is for cleaning the inside of thefuser unit.Streaks may appear when printing, particularlyafter changing the paper width from narrow towide, because of the traces (paper dust etc.) leftalong the width of the paper.When you change the width of the roll paper,check the conditions of the fuser unit and cleanit, and then restart printing.Memoz Cleaning requires special cleaning paper. Contact yourretailer.1 Prepare some cleaning paper.2 Load the cleaning paper onto theprinter.3 Press the scroll button ▲ or ▼.4 Select [Print Information], and pressthe button.5 Select [Cleaning Page], and press the button.6 Select [Execute], and press the button.The printing for cleaning starts.
