11-6ManagementAdding a UserThis adds a new user. You can add Up to 21 users (including the default login user name). The table below explainsthe user information to be registered.NOTE: By default, one of each default user with machine administrator rights and administrator privileges is alreadystored. The following are the default user's properties.User Name: DeviceAdminLogin User Name: 30 ppm model:3000, 35 ppm model:3500Login Password: 30 ppm model:3000, 35 ppm model:3500Access Level: AdministratorIt is recommended to periodically change the user name, login user name and login password regularly for yoursecurity.Use the procedure below to register a new user.NOTE: Refer to Character Entry Method on Appendix-5 for details on entering characters.1 Press the System Menu/Counter key on the main unitoperation panel.2 Press the U or V key to select [User/Job Account].Item DescriptionUser Name** Mandatory at user registration.Enter the name displayed on the user list (up to 32characters).Login UserName*Enter the login user name to log in (up to 32characters). The same login user name cannot beregistered.LoginPassword*Enter the password to log in (up to 64 characters).Access Level* Select Administrator or User for user accessprivileges.Account Name Add an account where the user belongs. The user,who registered his/her account name, can log inwithout entering the account ID. Refer to JobAccounting on page 11-15.E-mail Address The user can register his/her E-mail address. Theregistered address will be automatically selectedfor subsequent operations that need any E-mailfunction.Sys. Menu/Count.: a b*********************5 User Property6 Common Settings[ Exit ]4 User/Job Account
