2Preparation before Use2-43Loading Paper in the Multi Purpose TrayThe multi purpose tray will hold up to 50 sheets of A4 or smaller plain paper (80 g/m2 ).The multi purpose tray accepts paper sizes from A4 to A6 and Hagaki and from Legal to Statement-R, 216 x 340 mm,and 16K. Be sure to use the multi purpose tray when you print on any special paper.IMPORTANT: When using media types other than plain paper (such as recycled or colored paper), always specifythe media type setting. (Refer to Specifying Paper Size and Media Type for the Multi Purpose Tray on page 2-49.) Ifyou are using a paper weight of 106 g/m2 or more, set the media type to Thick.The capacity of the multi purpose tray is as follows.• A4 or smaller plain paper (80 g/m2 ), recycled paper or color paper: 50 sheets• Hagaki: 15 sheet• OHP film: 1 sheet• Envelope DL, Envelope C5, Envelope #10 (Commercial #10), Monarch, Youkei 4, Youkei 2: 1 sheetNOTE: When you load custom size paper, enter the paper size by referring to Specifying Paper Size and MediaType for the Multi Purpose Tray on page 2-49.When you use special paper such as transparencies or thick paper, select the media type by referring to SpecifyingPaper Size and Media Type for the Multi Purpose Tray on page 2-49.1 Pull the MP tray towards you until it stops.2 Pull out the support tray section of the MP tray.
