Preparation before Use2-10Setting Date and TimeFollow the steps below to set the local date and time at the place of installation.When you send an E-mail using the transmission function, the date and time as set here will be printed in the headerof the E-mail message. Set the date, time and time difference from GMT of the region where the machine is used.NOTE: Be sure to set the time difference before setting the date and time.1 Press the System Menu/Counter key on the main unitoperation panel.2 In the Sys. Menu/Count. menu, press the U or V key toselect [Common Settings].3 Press the OK key. The Common Settings menu appears.4 Press the U or V key to select [Date Setting], and pressthe OK key.5 A login screen will appear. Then, enter the user ID andpassword with administrator privileges to log in, andpress [Login] (the Right Select key).NOTE: The following administrator is registered in themachine at the factory.Login User Name: 30 ppm model:3000, 35 ppm model:3500Login Password: 30 ppm model:3000, 35 ppm model:35006 The Date Setting menu appears.7 Press the U or V key to select [Time Zone].Sys. Menu/Count.: a b3 System4 User/Job Account*********************5 Common SettingsCommon Settings: a b*********************2 Default Screen3 Sound[ Exit ]1 LanguageLogin User Name: L b********************Login Password:[ Login ]Date Setting: a b*********************2 Date Format3 Time Zone[ Exit ]1 Date/Time
