Olympus SP-610UZ Instruction Manual

14 ENTurn off the camera before opening the battery/cardcompartment cover.When using the camera, be sure to close and lockthe battery/card compartment cover.When to replace the batteriesWhen to replace the batteriesReplace the batteries when the error message shownbelow appears.Monitor top left Error messageFlashes in red44Battery Empty14 M00:3400:34Setting up using the supplied CDConnect the camera to the computer for set up using thesupplied CD.User registration using the supplied CD andinstallation of ib computer software is available onWindows computers only.We recommend that you use a computer equippedwith Windows XP (Service Pack 2 or later), WindowsVista, or Windows 7.WindowsWindows1 Insert the supplied CD in a CD-ROM drive.Windows XPA “Setup” dialog will be displayed.Windows Vista/Windows 7An Autorun dialog will be displayed. Click “OLYMPUSSetup” to display the “Setup” dialog.If the “Setup” dialog is not displayed, select “MyComputer” (Windows XP) or “Computer” (WindowsVista/Windows 7) from the start menu. Double-clickthe CD-ROM (OLYMPUS Setup) icon to open the“OLYMPUS Setup” window and then double-click“Launcher.exe”.If a “User Account Control” dialog is displayed, click“Yes” or “Continue”.2 Follow the on-screen instructions on yourcomputer.If nothing is displayed on the camera screen evenafter connecting the camera to the computer, thebattery may be exhausted. In this case, disconnectthe camera, and reconnect after replacing the batterywith a new one.●●