Olympus SP-610UZ Instruction Manual

53ENFor information on using the menus, see “Setup menu” (p. 6).Type D (CB-HD1)Type C3 Turn on the TV, and change “INPUT” to “VIDEO (an input jack connected to the camera).”For details on changing the input source of the TV, refer to the TV’s instruction manual.4 Turn on the camera, and use HI to select the image for playback.Depending on the TV’s settings, the displayed images and information may become cropped.To operate images with the TV remote controlTo operate images with the TV remote control1 Set [HDMI Control] to [On], and turn off the camera.2 Connect the camera and TV with an HDMI cable. “Connection via HDMI cable” (p. 52)3 First turn on the TV, and then turn on the camera.Operate by following the operation guide that is displayed on the TV.With some TVs, operations cannot be performed with the TV remote control even though the operation guide isdisplayed on the screen.If operations cannot be performed with the TV remote control, set [HDMI Control] to [Off] and operate using thecamera.●Saving battery power between shotsSaving battery power between shots[Power Save][Power Save]s (Settings 2) X Power SaveSubmenu 2 ApplicationOff Cancels [Power Save].OnWhen the camera is not being usedfor approx. 10 seconds, the monitorautomatically turns off to savebattery power.To resume standby modeTo resume standby modePress any button.Changing the display language [Changing the display language [ll]]s (Settings 2) X lSubmenu 2 ApplicationLanguagesThe language for the menus anderror messages displayed on themonitor is selected.