47ENFor information on using the menus, see “Setup menu” (p. 6).When erasing pictures in the internal memory, do notinsert the card into the camera.Before erasing pictures from a memory card, insertthe card into the camera.Protected images cannot be erased.To individually select and erase imagesTo individually select and erase images[Sel. Image][Sel. Image]1 Use FG to select [Sel. Image], and press theA button.2 Use HI to select the image to be erased, and pressthe A button to add a R mark to the image.Turn the zoom lever to the W end to display anindex view. Images can be quickly selected usingthe FGHI buttons. Turn to the T end to returnto the single frame display.R markMENUOKSel. ImageErase/Cancel5/305/303 Repeat Step 2 to select the images to be erased,and then press the m button to erase the selectedimages.4 Use FG to select [Yes], and press the A button.The images with a R mark are erased.To erase all images [All Erase]To erase all images [All Erase]1 Use FG to select [All Erase], and press theA button.2 Use FG to select [Yes], and press the A button.●●Saving print settings to the image dataSaving print settings to the image data[Print Order][Print Order]q (Playback menu) X Print Order“Print reservations (DPOF)” (p. 58)Print reservation can be set only for still images thatare recorded to the card.Protecting images [Protecting images [RR]]q (Playback menu) X RProtected images cannot be erased by [Erase] (p. 24,46), [Sel. Image] (p. 47), or [All Erase] (p. 47), butall images are erased by [Memory Format]/[Format](p. 48).1 Use HI to select an image.2 Press the A button.Press the A button again to cancel the settings.3 If necessary, repeat Steps 1 and 2 to protect otherimages, and press the m button.Rotating images [Rotating images [yy]]q (Playback menu) X y1 Use HI to select an image.2 Press the A button to rotate the image.3 If necessary, repeat Steps 1 and 2 to make settingsfor other images, and press the m button.The new picture orientations will be saved even afterthe power is turned off.●