11ENTo take underwater photosSelect [T UNDERWATER SNAPSHOT],[k UNDERWATER WIDE1],[l UNDERWATER WIDE2]*1 ,[H UNDERWATER MACRO].When the mode dial is set to s duringunderwater shooting (i.e., while theunderwater sensor is responding), the abovementioned 4 modes appear before othermodes.*1 When set to [l UNDERWATER WIDE2],the focus distance is automatically fixed toapprox. 5.0 m (16.4 ft.).Be sure to use an underwater case whenusing the camera at depths exceeding 10 m(32.8 ft.).When [MANOMETER] (p. 48) is set to[ON], the altitude/water depth (atmospheric/hydraulic pressure) appears on the shootingstandby mode screen as a rough guide.“Shooting mode display” (p. 8)“Important information about water andshock resistant features” (p. 68)To lock the focus distance forunderwater shoots (AF lock)When [T UNDERWATER SNAPSHOT],[k UNDERWATER WIDE1], or,[H UNDERWATER MACRO] is selected,press F.AFL12M4INN ORM^ markTo cancel, press F again to clear the^ mark.This section describes the available shootingmodes. Depending on the mode, some settingscan be changed. For details on the functionsthat can be adjusted, see “Menus for ShootingFunctions” on page 29.Using the best mode for theshooting scene (s mode)1 Set the mode dial to s.PORTRAITSET OKMENUEXITAn explanation of the selected mode is displayedwhile the E button is pressed and held.2 Use EF to select the bestshooting mode for the scene, andpress the o button.12M4INN ORMIcon indicatingthe scene modethat is setTo change to another scene mode, use themenu. [O SCENE MODE] (p. 33)●Using Shooting Modes