Omnia Omnia-6EX / EXi Installation And Operation Manual

Contents

Omnia Omnia-6EX / EXi Installation And Operation Manual Manual pdf 80 page image

Omnia-6ex Use and Operation Manual – V: 1.2080wheel. The operation is canceled and the Preset list and menu is again displayed.Note: You cannot save a preset using any of the factory-supplied preset names. A different preset name must beused, using the Save As menu option. The factory presets are read only, and cannot be overwritten. Likewise newuser presets cannot be stored with the same name as a factory preset.Renaming and Deleting PresetsTo rename or delete a preset, highlight and click the Modify choice in the Preset menu. Rotate the jog wheel tohighlight the Preset List and click. Now highlight and Click to select the preset to be modified. To rename theselected preset, highlight and click on Rename. The Rename Preset dialog will appear and a new name for it can beentered. (See Saving Presets above) After entering the preset name’s last character, rotate the jog-wheel until the •Checkmark is highlighted. Click the jog wheel to save the new preset. If you wish to cancel the operation, highlightthe X and click. The operation will be canceled and the Preset Menu again displayed. To Delete the selected preset,highlight and click on Delete. You will be asked to confirm the destruction of the selected preset. Highlight andclick on Yes to go ahead and delete the preset or No to cancel and return to the Rename and Delete screen.Protecting PresetsBeginning with Front Panel Display software Version 1.0.3.x, it now possible to protect customer presets with asecret passcode. To use the feature, you must create a custom preset (or recall factory and rename it as your own).The correct order for using the Protect Preset function is as follows:1. Create a preset and save it as your own (let’s use a preset name “TEST33” as an example;2. Click the “Protect” button in the Preset menu.3. Enter your passcode (up to six characters), and click on the checkmark to save it.4. The preset will now be displayed on the screen with a [U] next to it, that is, it will be shown as TEST33[U].This means that the preset has a passcode assigned to it, but the preset is not yet “locked”.5. To Lock the preset, go back to the Preset List, click on the “Protect” button, but DO NOT enter a passcodethis time – instead just click the Checkmark box. An error message will pop up saying “ERROR:Permission Denied” – this is normal behavior. Click the “OK” box, and notice that the preset is now listedon the Meter Screen as TEST33[L]. The “L” next to the preset means that it is Locked and your preset isnow secure.6. Please see the next section for how to access a protected preset.