45 ShootingUploading metadata [META DATA]You can perform the following operations.If necessary make preparations.• Loading metadataInsert the memory card on which the metadatais recorded into the camera. (For details on clipmetadata, see page 44.)• Selecting whether to record the metadata on thememory card• Initializing the metadata inside the camera• Displaying the metadata inside the camera1 Turn the POWER/MODE switch to go into mode.2 Press the Menu operation (Page 28 of Vol.1)3 Tilt the OPERATION lever in the < >< >directions to select [META DATA], and push theOPERATION lever (or tilt in the < > direction).4 Tilt the OPERATION lever in the < >< >directions to select items, and push theOPERATION lever.[CARD READ]:Loads the metadata set on the memory card onto the camera.Move to [CARD READ], push the OPERATIONlever, select either [SLOT1]/[SLOT2]/[NO], andpush the OPERATION lever.• Up to eight items of metadata on the memorycard can be displayed, starting from the mostrecent creation date.• If characters other than single-bytealphanumeric characters are used in themetadata file to be loaded they are displayedas “*”.[RECORD]:Sets whether to record the metadata loaded onthe camera simultaneously on a memory cardwhen recording.Select either [ON]/[OFF] (format/do not format),and push the OPERATION lever.The factory setting for this mode is [OFF].[USER CLIP NAME]:The [USER CLIP NAME] recording method isselectable. For details, see the next column.[META DATA PROP]:Displays the metadata recorded in the camera.[CLIP COUNTER RST]:Resets the counter value to 1.Select either [YES]/[NO] (reset/do not reset),and push the OPERATION lever.[META INIT SET]:Initializes the metadata recorded in the camera.Select either [YES]/[NO] (initialize/do notinitialize), and push the OPERATION lever.5 Press the mode.Selecting the [USER CLIP NAME]recording methodPress the DATA][USER CLIP NAME] to select the [USERCLIP NAME] recording method. Two options areavailable: [TYPE1] and [TYPE2].[USER CLIP NAME] to be recorded[TYPE1] [TYPE2]When clip metadatahas been loaded Uploaded dataUploaded data+COUNTvalue*When no clipmetadata has beenloaded, or whenrecording of loadedclip metadata hasbeen disabledSequential5-digit numberin the order ofshootingSequential5-digit numberin order ofshooting
