|
93 Menu[META DATA] screen (AVCHD mode only)Item Displaymode Description of settings[CARD READ] (AVCHDmode only)Loads the metadata recorded on the memory card into the camera.[SLOT1] [SLOT2] [NO]• [NO FILE] is displayed when there is no metadata recorded on the memorycard.[RECORD] (AVCHDmode only)Sets whether to simultaneously record the metadata on a memory card as it isloaded into the camera.[ON]: Records simultaneously.[OFF]: Does not record simultaneously.[USER CLIPNAME](AVCHDmode only)Sets [USER CLIP NAME] recording method.[TYPE1]: The user clip name is the same as the [CLIP NAME] if nometadata is uploaded or if no uploaded data exists.[TYPE2]: The user clip name is the same as the [CLIP NAME] if nocombination of data and COUNT value is uploaded, or if nouploaded data exists.[META DATAPROP](AVCHDmode only)Displays the metadata recorded in the unit.[YES] [NO][CLIPCOUNTER RST](AVCHDmode only)Resets the COUNT value to 1.[YES] [NO][META INITSET](AVCHDmode only)Initializes the metadata recorded in the unit.All settings, including the [ON]/[OFF] setting for [RECORD] are cleared.[YES] [NO]is the factory default mode.[OTHER FUNCTIONS] screenItem Displaymode Description of settings[IR REMOTE] Sets the operations of the supplied remote control unit.[ON]: Accepts commands from the remote control.• Note that if the same type of remote control is used near theunit, the unit may receive commands from the other remotecontrol during shooting, for example, and suddenly operate in anunexpected manner.[OFF]: Does not accept commands from the remote control.[DV CONTROL] (DV modeonly)Specifies the control method when a backup device is connected to the OUT> terminal for backup recording.[OFF]: Backup device is not controlled.[EXT]: Backup device controlled using button. Note,however, that recording on the camera is not performed.[BOTH]: Backup recording performed by the unit and the backup device.[CHAIN]: When the recording nears the end, recording on the backup devicewhich is on standby will automatically start.is the factory default mode.
|
