Panasonic AG-AC130A Operating Instructions Manual

Contents

Panasonic AG-AC130A Operating Instructions Manual Manual pdf 53 page image

53 Playback12 Indicators• In AVCHD mode[ ]: Shot markThis indicates that a clip has a shot mark.(Page 53)[ ]: IndexThis indicates that indexes have been added.(Page 57)[ ]: Resume playback displayDisplayed on clips on which resume playbacksetting has been applied.• In DV mode[ ]: Shot markThis indicates that a clip has a shot mark.(Page 53)[ W ]: WideDisplayed on clips recorded in 16:9 angularfield.[ ]: Resume playback displayDisplayed on clips on which resume playbacksetting has been applied.[ X ] (Yellow): Defective clip (repairableclip)Displayed on defective clips resulted fromturning off the power during recording, etc.These may be repaired. (Page 58)[ X ] (Red): Defective clip (unrepairableclip)Displayed on defective clips resulted fromturning off the power during recording, etc.Delete these clips because they are notrepairable. If you cannot delete these clips,format the memory card with this camera.(Page 13)[ ? ]: Defective clip (clip with unknowncontent)Displayed on clips with unknown contentbecause the content is incompatible with thiscamera.[ ! ]: Incomplete clipWhen the recording capacity of oneclip exceeds 4 GB (recording time isapproximately 16 minutes), the clip isautomatically split and saved as another clip.This is displayed on clips that were not savedsuccessfully as associated clips due to powerbeing switched off during recording, etc.• To display CLIP PROPERTY on thethumbnail screen, move the cursor using theOPERATION lever to the clip you want todisplay properties for, and press the MODE CHK> button. For details on display,see “Clip information screen” (Page 60). Pressthe button while displaying theproperties to return to the thumbnail screen.Adding shot marks to clipsAdding shot marks [ ] will make it easier to findthe clips you are looking for.1 Tilt the OPERATION lever in the < >< >< >< > directions to move the cursor to theclip for which a shot mark is to be added.2 Press the USER button to which the shotmark function has been allocated. (Page 83)To release a shot mark, repeat the precedingsteps.• It is not possible to add shot marks to clipsshot using a consumer camcorder model.Selecting the memory card slot forplaybackYou can switch the memory card slot for playback.1 Press the button when thethumbnail screen is displayed in the mode.