Panasonic AG-HPG10P Operating Instructions Manual

Also see for AGHPG10 - MEMORY CARD PORTABLE RECORDER: Operating instructions Brochure & specs

Contents

Panasonic AG-HPG10P Operating Instructions Manual Manual pdf 27 page image

27 PreparationsUp to four sets of settings can be saved as fourfiles on the SD memory card, and they can beloaded from the card.1 Press [MODE] to display the thumbnaildisplay off screen.2 Select “USER FILE” on the setting menu“CARD FUNCTIONS” screen, select “YES”,and press [STILL].• Basic operations on the setting menus (page70)CARD FUNCTIONSSD CARD FORMATUSER FILE - - - -- - - -3 Using [FF] or [REW], select the file number(1, 2, 3 or 4).SCENE FILE (SD CARD)FILE SELECTREADWRITEFILE 1FILE 2FILE 3FILE 4- - - -YESNO FILENO FILENO FILENO FILE- - - -TITLE RELOAD4 Using [STOP] and [PLAY], select “WRITE”,and press [STILL].SCENE FILE (SD CARD)FILE SELECTREADWRITEFILE 1FILE 2FILE 3FILE 4- - - -YESNO FILENO FILENO FILENO FILE- - - -TITLE RELOAD5 Display “YES” using [REW] and [PLAY], andpress [STILL].• In the figure below, “TITLE1” is the filename.• After the data has been saved, “WRITE OK”is displayed.WRITE FILE 1YES - - - - PUSH STILLTITLE EDITT I T L E 1SCENE FILE (SD CARD)Saving USER files on SD memory cards6 Press [MENU] four times to release themenu mode.To give titles to files1) Perform steps 1 to 4.2) Select the characters using [STOP] and [PLAY],and move to the next character using [STILL].• Any of the following characters can be input.(Space), A to Z, 0 to 9, : ; < = > ? @ [¥] ^ _-. /• All the characters can be deleted using theunit’s [RESET] button.3) After all the characters have been input, press[FF] at the left end of the characters (or [REW]at the right end), and press [STILL].To re-load files from SD memory cards1) Performs steps 1 and 2.2) Move to [READ] using [STOP] and [PLAY],display “YES”, and press [STILL]. The files arenow re-loaded.3) If “TURN POWER OFF” appears after loading,turn off the power, and then turn it back on. Theloaded files are now set.• If “WRITE NG FORMAT ERROR” is displayed,format the SD memory card. (Page 26)• If “WRITE NG WRITE PROTECT” is displayed,release the SD memory card protection.• If “WRITE NG CANNOT ACCESS” is displayed,complete the other operations (such asplayback), and then proceed to operate.• If “WRITE NG ERROR” is displayed, the SDmemory card may be defective. Replace thecard.