Panasonic AG-HPG10P Operating Instructions Manual

Also see for AGHPG10 - MEMORY CARD PORTABLE RECORDER: Operating instructions Brochure & specs

Contents

Panasonic AG-HPG10P Operating Instructions Manual Manual pdf 61 page image

61 EditingUSB DEVICEDISCONNECT10 Hold down [POWER] for at least 2seconds to turn off the unit’s power.The PC mode cannot be released simply byholding down [MODE].• While files are being transferred, the powerwill not be turned off even if the POWERbutton is pressed.• Do not remove the P2 card while the USBconnection is established.• While the USB connection is established, theP2 card access LEDs will remain off at all timesexcept when the data on the cards is beingaccessed.Editing in the 1394 device mode.Before editing in the 1394 device mode, refer to “The following conditions must be met when using a 1394connection” on page 52.1 Hold down [POWER] for at least 2 secondsto turn the power on.The thumbnail screen now appears.2 Press [MODE] to display the thumbnaildisplay off screen.3 Press [MENU].4 Using [STOP], [PLAY] and [STILL], select“OTHER FUNCTIONS” – “PC MODE”, andpress [STILL].5 Using [STOP] and [PLAY], select “1394DEVICE”, and press [STILL].6 Press [MENU] twice to display the thumbnaildisplay off screen.7 Hold down [MODE] for at least 2 seconds.After “1394 DEVICE” is displayed, “1394DEVICE CONNECT” is displayed once the fileaccess enable status is established.• The mode cannot be changed or menusdisplayed while the 1394 device mode isestablished.8 Edit the data on the P2 card using thepersonal computer.9 After the data has been edited, disconnectthe 1394 cable.The display on the LCD monitor changes from“1394 DEVICE CONNECT” to “1394 DEVICEDISCONNECT.”• After depositing all the drive icons intothe recycle bin, check that “1394 DEVICEDISCONNECT” is displayed on the LCDmonitor, and then disconnect the 1394 cable.10 Hold down [POWER] for at least 2seconds to turn off the unit’s power.The PC mode cannot be released simply byholding down [MODE].• While files are being transferred, the powerwill not be turned off even if the POWERbutton is pressed.• Do not remove the P2 card while the 1394connection is established.• Before replacing one P2 card with another,deposit the drive icon in the recycle bin.