75 MenuThe underlined settings are the factory mode settings.PLAYBACK FUNCTIONS screenItem Description of settingsREPEAT PLAY This is used to set repeat playback.(Page 43)ON: Playback is repeated.OFF: Playback is not repeated.AUDIO OUT This is used to set the audio signals to be output from the AUDIO OUT connectors(pin jacks) during playback.CH1 · CH2:CH1 connector = CH1 signal, CH2 connector = CH2 signal,CH1:CH1 connector = CH1 signal, CH2 connector = CH1 signal,CH2:CH1 connector = CH2 signal, CH2 connector = CH2 signal,CH3 · CH4:CH1 connector = CH3 signal, CH2 connector = CH4 signal,CH3:CH1 connector = CH3 signal, CH2 connector = CH3 signal,CH4:CH1 connector = CH4 signal, CH2 connector = CH4 signal,AV OUT SETUP screenItem Description of settingsCMPNT/SDI SEL This is used to set the format when D connector signals and HD/SD-SDI signals areoutput.(60 Hz regions)AUTO:Operation reflects the setting selected for the SYS FORMAT item on theRECORDING SETUP screen.1080i, 480i(50 Hz regions)AUTO:Operation reflects the setting selected for the SYS FORMAT item on theRECORDING SETUP screen.1080i, 576iSDI OUT This is used to set the SDI output.ON: SDI signals are output.OFF: SDI signals are not output.SDI METADATA This is used to set whether to superimpose the meta-data when HD-SDI signals areoutput.ON: The meta-data is superimposed.OFF: The meta-data is not superimposed.SDI EDH This is used to set whether to superimpose error detection handling (EDH) when SD-SDI signals are output.ON: EDH is superimposed.OFF: EDH is not superimposed.SETUP(60 Hz regions only)The setup level of the video signals during playback is set.0%:0% is set as the output setup level.7.5%A:7.5%A is set as the output setup level.
