Panasonic AG-HPG10P Operating Instructions Manual

Also see for AGHPG10 - MEMORY CARD PORTABLE RECORDER: Operating instructions Brochure & specs

Contents

Panasonic AG-HPG10P Operating Instructions Manual Manual pdf 57 page image

57 Saving dataImporting data from a hard drive to P2 cardsImporting clips one partition at a timefrom a TYPE S or P2 Store hard driveYou can import data (load data from the hard driveto a P2 card) at high speed one partition at a time(one card at a time) onto a P2 card of the samesize as the original card.1 Insert the P2 card that will serve as theimport destination.2 Display the P2 thumbnail screen.3 Press the [MENU] button.4 Using [STOP], [PLAY] and [STILL], select“HDD” – “EXPLORE”, and press [STILL].5 Using [STOP] and [PLAY], select the copysource partition, and press [STILL].6 Press [MENU].7 Using [STOP], [PLAY] and [STILL], select“OPERATION” – “IMPORT” – “ALL CLIP”,and press [STILL].8 Move the cursor to the number of theP2 card slot which serves as the importdestination and which contains a formattedP2 card, and press [STILL].9 Select “YES”, and press [STILL].Importing now begins.When importing is completed, “COPYCOMPLETED!” appears on the screen.• When data has been imported to a P2 card whichis different from the source P2 card, some clipsmay be incomplete (in which case, they will beindicated by the [!] indicator). If this is the case,use the connecting function to reconfigure theseclips. Refer to “Connecting incomplete clips”.• Using a menu setting, you can choose whether toverify the two sets of data when copying.Importing one clip at a timeto a P2 cardYou can select the hard drive clips, and importthem onto a P2 card.1 Insert the P2 card that will serve as theimport destination.2 Display the thumbnail screen of the harddrive.3 Press [MENU].4 Using [STOP], [PLAY] and [STILL], select“HDD” – “EXPLORE”, and press [STILL].5 Using [STOP] and [PLAY], select the copysource partition, and press [STILL].6 Select the clip to be copied.7 Press [MENU].8 Using [STOP], [PLAY] and [STILL], select“OPERATION” – “IMPORT” – “SELECTEDCLIP”, and press [STILL].9 Using [STOP] and [PLAY], select the numberof the P2 card slot whose data is to beimported, and press [STILL].10 Select “YES”, and press [STILL].Importing now begins. When importing iscompleted, “COPY COMPLETED!” appears onthe screen.• Verifying is not executed when importing one clipat a time.• The operation involved in importing one clip at atime is similar to copying the clips.For the precautions to be observed whenimporting one clip at a time, refer to “Copyingclips.”