143 MenuAUDIO SETUP screenItem Setting NotesLIMITER CH1 Sets the CH1 limiter.ON, OFF• When the AUDIO AUTO/MANUCH1 switch is set to AUTOand auto adjustment mode isactive, the limiter is disabledregardless of these settings.LIMITER CH2 Sets the CH2 limiter.ON, OFF• When the AUDIO AUTO/MANUCH2 switch is set to AUTOand auto adjustment mode isactive, the limiter is disabledregardless of these settings.LIMITER CH3 Sets the CH3 limiter.ON, OFF• When the AUDIO AUTO/MANUCH3 switch is set to AUTOand auto adjustment mode isactive, the limiter is disabledregardless of these settings.LIMITER CH4 Sets the CH4 limiter.ON, OFF• When the AUDIO AUTO/MANUCH4 switch is set to AUTOand auto adjustment mode isactive, the limiter is disabledregardless of these settings.AUTO LEVELCH3Selects the method for setting CH3 level.ON:Engages the auto adjustment mode. (The limiter is notavailable.)OFF:Locks the level.AUTO LEVELCH4Selects the method for setting CH4 level.Same setting as AUTO LEVEL CH3.ON, OFF25M REC CH SEL Selects the audio channels to be recorded in the DVCPROand DV formats.2CH:Only recorded on CH1 and CH2.4CH:Records on all four channels.• Not available in the followingconditions.· When SYSTEM MODE is1080-59.94i (50i) or 720-59.94P (50P).· When SYSTEM MODE is setto 480-59.94i or 576-50i andREC FORMAT is set to theDVCPRO50 codec.· REC SIGNAL is set to 1394(operation depends on 1394input status).· When compiling to a clip inone-clip recording mode.TEST TONE Selects the test signal.LEVEL1:A 1 kHz test tone is output during color bar output.LEVEL2:Outputs the above test tone at a volume lower thanLEVEL1.OFF:Does not output a test tone.___indicates the factory setting.
