60Configuration of setup data filesThis camera makes it possible to save a scene file to each of the F1 to F6 positions on the SCENE FILEdial.Use of an SD memory card makes it possible to save up to four of the F1 to F6 files on an SD card for laterretrieval.The setting menu values can be stored as a user file in the camera-recorder and up to four files can bestored on the SD memory card.The setting data files are configured as shown below.F1 Default valueSCENE FILE(Factory defaults)SCENE FILEscreen INTIAL *1SCENE FILE screenLOAD/SAVE *1F2 Default valueF3 Default valueF4 Default valueF5 Default valueF6 Default valueF1 Current valueSCENE FILE(Current operating status values)F2 Current valueF3 Current valueF4 Current valueF5 Current valueF6 Current valueF1 Saved valueSCENE FILE(Saved camera values)F1F2F3F4F5F6SCENEFILE 1F1F2F3F4F5F6SCENEFILE 2F1F2F3F4F5F6SCENEFILE 3F1F2F3F4F5F6SCENEFILE 4USER FILE1USER FILE2USER FILE3USER FILE4USER FILE initial valueUSER FILE(Factory defaults)OTHER FUNCTIONS screenUSER FILE INTIALOTHER FUNCTIONS screenUSER FILE LOAD/SAVECARD FUNCTIONS screenSCENE FILE LOAD/SAVE *2*1: SCENE FILE dial unit*2: All files F1 to F6Current USER FILE valuesUSER FILE(Current operating status values)Saved USER FILE valuesUSER FILE(Saved camera values)SCENE FILE(SD CARD)USER FILE(SD CARD)F2 Saved valueF3 Saved valueF4 Saved valueF5 Saved valueF6 Saved valueCARD FUNCTIONS screenUSER FILE LOAD/SAVEAG-HPX250P/AG-HPX250EN SD CARD• Running the menu option MENU INIT in the OTHER FUNCTIONS screen returns all currentoperating status values and saved camera-recorder values in the F1 to F6 scene files as well asin the user file to their factory defaults. This function does not return the TIMEZONE setting toits factory default.• SCENE FILE and USER FILE settings cannot be operated when recordings can be compiled toa previous clip in one-clip recording mode (i.e., when “1 CLIP” is displayed). After closing themenu, push the Operation lever in the ▼ direction (STOP) for approximately 2 seconds, and tryonce more after ending clip linking.Using scene files (Scene File Data) (continued)
