39 ShootingUsing the USER buttonsYou can allocate the selected function to USERMAIN and USER buttons 1 to 4.USER MAIN butonUSER1 – 3 butonUSER4 butonSelectable FunctionsSPOTLIGHT:Assigns auto iris control on/off for spotlight.BACKLIGHT:Assigns auto iris control on/off for backlightcompensation. (Page 40)ATW:Turns the ATW function on or off. (Page 33)ATW LOCK:Pressing this lock during ATW operation locksthe white balance. Press again to start the ATWfunction again.S.GAIN:Allocates a function that increases gain to 24 dBor greater.The gain value can be set with SUPER GAIN onthe setting menu SW MODE screen. (Page 138)D.ZOOM:Allocates the DIGITAL ZOOM function.Each time the button is pressed, the settingchanges in the following order: x2 → x5 → x10 →OFF (x1). (Page 19)Y GET:Assigns a function that displays the brightnesslevel at the center of the image.DRS:Assigns a function that stretches the dynamicrange.The setting is linked to the ON/OFF of setting ofDRS on the setting menu SCENE FILE screen.(Page 37)TEXT MEMO:Assigns text memory recording. (Page 42)SLOT SEL:Assigns P2 card slot selection.SHOT MARK:Assigns the shot marker function. (Page 41)MAG A. LVL:Assigns a function that magnifies the audio levelmeter. (Page 55)LVL METER:Allocates a function that switches between CH1/2and CH3/4 for the audio level meter display andaudio channel for headphones, built-in speaker,AUDIO OUT terminal output, and HDMI OUToutput while the button is held down.PRE REC:Assigns a function that turns the PRE RECfunction on and off. (Page 44)WFM:Assigns a function that switches WAVE FORMdisplay.The WAVE FORM display is selected using themenu option WFM in the SW MODE screen.This is the same function as the WFM button.(Page 40)LAST CLIP:Allocates a function to delete the clip shotimmediately beforehand. (Page 42)FBC:Turns the FBC function on or off. (Page 38)LCD B.L:Allocates a function to switch the backlightbrightness of the LCD monitor.The setting is linked to the LCD BACKLIGHT onthe setting menu DISPLAY SETUP screen. (Page148)• As factory settings, the following functionsare allocated to the buttons displayed.USER MAIN : Y GETUSER1 : BACKLIGHTUSER2 : TEXT MEMOUSER3 : DRSUSER4 : SLOT SEL• If you press a USER button to which one ofthe functions has been allocated, and thenturn OFF the power during operation of theUSER button function, the effect added to theimage will not be retained.SPOTLIGHT, BACKLIGHT, ATW, ATW LOCK,S.GAIN, D.ZOOM, Y GET, WFM, MAG A.LVL,FBC
