71 ShootingRecording time codes and user bitsWhen SYSTEM MODE is set to 1080-59.94i, 720-59.94P, 480-59.94iSystem setting status Recorded TC Output TC DisplayedTC Recorded UB Output UBSYSTEMMODERECSIGNAL REC FORMAT CAMERAMODEFRAMERATE LTC VITC TC OUTLTC andVITCembeddedin HD SDITC tc (24/30conversion) LTC UB VITC UBTC IN/OUTconnectorUB *1LTC UBembeddedin HD SDI *1VITC UBembeddedin HD SDI1080-59.94iCAMERADVCPROHD/60i60i, 30P — R-RUN/F-RUN *3DF/NDF30 framesSame asLTCvalueOutputsLTCOutputsLTCTC:30 framestc:24 framesFollows UBMODE.·In ‘EXT’slaves to UBin TC IN/OUTconnectorFrame ratedataOutputsLTC UBOutputsLTC UBFramerate data(60i) 1 to 30FRAME24P, 24PA —R-RUN/F-RUN *5NDF locked30 framesAVC-I100/60iAVC-I50/60i —— R-RUN/F-RUN *3DF/NDF30 framesOutputsLTCOutputsLTC1 to 30FRAMEAVC-I100/30PNAVC-I50/30PN —— R-RUN/F-RUN *3DF/NDF30 framesOutputsLTCOutputsLTC30 FRAMEOther than30 FRAMER-RUN lockedDF/NDFEvery activeframe30 framesMatchesrecorderTC atstart ofrecording30 frames/sMatchesrecorderTC atstart ofrecording30 frames/sAVC-I100/24PNAVC-I50/24PN —— R-RUN/F-RUN *7NDF locked24 framesConvertsand outputsLTC to 30framesConvertsand outputsLTC to 30framesRecordingTC:24 framesPlaybackTC:24 framestc:30 framesOutputadjustedto Over60i basedon LTCUBOutputadjustedto Over60i basedon LTCUB24 FRAMEOther than24 FRAMER-RUN lockedNDF lockedEvery activeframe24 framesMatchesrecorderTC atstart ofrecording30 frames/sMatchesrecorderTC atstart ofrecording30 frames/s1394 DVCPROHD/60i — —R-RUN/F-RUN *2DF/NDF30 framesRecordsVAUX TCin 1394input atall times *6OutputsLTCOutputsLTCTC:30 framestc:24 framesFollows UBMODE.·In ‘EXT’slaves toLTC UB in1394 inputRecordsVITC UB in1394 input atall timesOutputsLTC UBOutputsLTC UBOutputsVITC UB*1: When UB MODE is FRM. RATE, playback of native clips is the pulldown frame rate read from VITC UB.*2: In Free Run mode, it is slaved to the value input to the DVCPRO/DV connector. It does not slave it tothe time code from the TC IN/OUT connector.*3: In Free Run mode, it is slaved to the time code input to the TC IN/OUT connector.*5: In Free Run mode, it is slaved when TC input to the TC IN/OUT connector is non-drop frame. But notslaved to it during recording.*6: VAUX TC is time code recorded in the video AUX area in the DVC format.*7: In Free Run mode, it is slaved to the time code input to the TC IN/OUT connector, whose value isconverted to 24 frames when it was NDF 30 frames. But not slaved to it during recording.
