151 MenuOTHER FUNCTIONS screenItem Setting NotesUSER FILE Saves user files to camera-recorder memory, loads theminto camera-recorder memory or initializes them. (Page 60)LOAD, SAVE, INITIAL• This does not affect options in the SCENE FILE screen.• This setting cannot be madewhen REC SIGNAL is 1394.• Not available when compilingto a clip in one-clip recordingmode.REMOTE Sets the operations of the supplied remote control unit.“Remote control setup” (Page 24 of Vol. 1)OFF:Operations are not accepted from any remote control.1:Accepts commands from the remote control set for“operation mode 1”.2:Accepts commands from the remote control set for“operation mode 2”.1394 CONTROL Selects the method the camera-recorder uses forcontrolling external devices connected to the DVCPRO/DV connector. (Page 106)EXT:Controls only the external device, but does not transferdata to the camera-recorder for recording.BOTH:BOTH: Controls both the external device and the camera-recorder, and also records.CHAIN:When there is no more space left for recording in thecamera-recorder, recording is automatically made to theexternal device.OFF:No control• Not available in AVC-Intramode and DVCPRO HD nativemode.• Not available during interval,one-shot and loop recording.1394 CMD SEL Determines how recording is stopped when the camera-recorder controls an external device connected to theDVCPRO/DV connector.REC_P:Engages REC/PAUSE status.STOP:Stops recording.• Not available in AVC-Intramode and DVCPRO HD nativemode.• Not available during interval,one-shot and loop recording.ACCESS LED Determines whether or not the P2 CARD ACCESS LEDshould light.ON, OFFTALLY LAMP Sets lighting of the tally lamp.OFF:The tally lamp does not light.FRONT:Front tally lamp (microphone side) lights.REAR:Rear tally lamp (viewfinder side) lights.BOTH:Both tally lamps light.CLOCK SETTING Sets the internal calendar (date).“Setting the calendar” (Page 26 of Vol. 1)___indicates the factory setting.
