– 103 –Setting Menu ScreensLOW SETTING ScreenThis page sets the low level.ItemMASTER GAINH.DTL LEVELV.DTL LEVELDTL CORINGH.DTL FREQ.DARK DTLLEVEL DEPEND.MASTERGAMMABLACKSTRETCHMATRIX TABLEVariablerangep3 dB...0 dB...30 dB0...13...310...10...310...8...151...3...50...50...3...50.35...0.60...0.75ONOFFABVFdisplayENGENGENGENGENGENGENGENGENGENGRemarksGains of p3, 0, 3, 6, 9, 12, 15, 18, 21,24 and 30 dB (S. H. GAIN) can be set.H.DTL (detail) level settingV.DTL (detail) level settingDTL coring settingH.DTL frequency selection1: 2.5 MHz 4: 4 MHz2: 3 MHz 5: 4.5 MHz3: 3.5 MHzDark detail settingIt boosts the detail of the black areas.LEVEL DEPEND. settingIt eliminates the detail only in the darkareas when the Y detail is boosted.The higher the number selected, thewider the range across which the detailis eliminated.Master gamma setting 0.01 stepsON/OFF switching for mode whichcompensates low-illumination black-outColor compensation table selectionThe underlined setting in the Variable range column indicates the preset mode.Menu screen display methodsUSER menu: Setting the MENU switch to SET displays the USER menu.ENG menu: Holding down the SHIFT/ITEM and UP buttons simultaneously and setting the MENU switch to SET displaysthe ENG menu.- L O W SET T I N G -¢ M ASTER G A I N : 0 d BH . DT L L EVE L : 1 3V . DT L L EVE L : 1 0DT L C O R I N G : 0 8H . DT L FRE Q . : 0 3DAR K DT L : 0 0L EV E L DEPEND : 0 3M ASTER G A MM A : 0 . 6 0M ATR I X TAB L E : AB L ACK STRETCH : O F F|Note{DARK DTL and LEVEL DEPENDfunction in a mutually opposite way:LEVEL DEPEND is automaticallyset to 0 when DARK DTL is set to avalue other than 0; and DARK DTLis automatically set to 0 when LEV-EL DEPEND is set to a value otherthan 0.
