– 54 –Status Displays Inside the Viewfinder ScreenSelecting Display ItemsThe items to be displayed on the viewfinder screen can be selected by switching the displayON/OFF setting independently for each item at the VF DISPLAY page. The items which can beselected are as follows.¡Display mode (See “Display Mode and Setting Change/Adjustment Course Message”.)¡Extender display¡Shutter speed/mode display¡Remaining tape length display¡Remaining battery level display¡Filter display¡White balance memory display¡Gain value display¡Level meter display¡Iris value/super iris ON status display¡Camera ID display¡The camera ID is displayed when recording the color bar according to the OUTPUT/AUTOKNEE switch setting. See “Setting the Camera ID” (page 57) for a detailed description.Select the items to be displayed on the viewfinder screen.1 Set the MENU SET/OFF switch to SET.The page on which the previous setting menu operations were completed appears on theviewfinder screen. (When the menu is used for the first time, the first page appears.)2 Press the PAGE button until the VF DISPLAY page shown below appears.(This operation can also be performed using the PAGEoUP/DOWN function.)3 Press the SHIFT/ITEM button to move the cursor to the position of the desired item.4 Press the UP and DOWN buttons to choose whether to display (ON) or not display (OFF)the selected item on the viewfinder screen.The setting switches to ON or OFF each time the UP (or DOWN) button is pressed.Repeat steps 3 and 4 when setting display ON/OFF for other items.5 When menu operations have been completed, set the MENU SET/OFF switch to OFF.The setting menu disappears from the viewfinder screen and the displays indicating the set-tings of the selected items appear.- VF D I SP L AY -¢ D I SP M O DE : 3EXTENDER : O NSHUT TER : O NTAPE : O NBAT TERY : O NF I L TER : O NW H I TE : O NG A I N : O NL EVE L M ETER :CA M ERA I D : O NI R I S : I SO NS + I RDisplay modeExtender displayShutter speed/mode displayRemaining tape length displayRemaining battery level displayFilter displayWhite balance memory displayGain value displayLevel meter displayIris value/super iris ON status displayCamera ID display