– 13 –Audio Function Section (3)z ALARM (warning tone volume) controlThis adjusts the warning tone volume heard from the speaker | or the earphone connectedto the PHONES jack ü. When it is set to the lowest position, the warning tone is not audible.However, by making changes to the inside parts, the tone can be made audible even whenthe control is at its lowest position.{ MONITOR (volume) controlThis adjusts the volume of the sound other than the warning tone—the sound from thespeaker | or earphone ü. When it is set to the lowest position, no sound is heard.Audio Function Section (4)| SpeakerDuring recording, the EE sound can be monitored; during playback, the playback sound canbe monitored.The warning tone is heard through the speaker in synchronization with the flashing or lightingof the warning lamp and warning display.The speaker sound is automatically muted when an earphone is connected to the PHONESjack ü.} MONITOR SELECT (audio channel selector) switchThis selects the audio channel whose sound is to be heard through the speaker | or ear-phone.CH1: The audio channel 1 sound is output.CH1, 2: The sound produced by mixing the audio channel 1 and 2 sound or the stereosound is output. However, only the mixed sound is output from the speaker |.CH2: The audio channel 2 sound is output.~ MONITOR (sound selector) switchThis selects the sound of the earphone when CH1, 2 is selected with the MONITOR SELECTswitch }.ST: The stereo sound of audio channel 1 and 2 is output.MIX: The mixed sound of audio channel 1 and 2 is output.ü PHONES (earphone) jack (mini-jack)When an earphone (option) is connected to this jack, the sound selected by the MONITORswitch ~ can be heard. The warning tones relating to the unit’s operation or status can alsobe heard. An earphone enabling a sufficiently high volume of sound to be heard is recom-mended.When the earphone is connected, speaker | sound is automatically muted.z{|t~}uvyü w xControls and Their Functions