– 112 –E: ON. : OFFItemF2.8 ADJF16 ADJVariablerange RemarksVFdisplay————Voltage is output only when selectedby the cursor (arrow).Voltage is output only when selectedby the cursor (arrow).ENGENG|Note{When using a lens which allows the lens iris open or close end to be adjusted, seteither “F2.8 ADJ” or “F16 ADJ” to ON and repeatedly adjust the lens iris until it is“F2.8” or “F16”, respectively. (Fujinon S18q6.7 BRM4/BERM4 lenses do not havethis adjustment function.)MENU SELECT 1/3 ScreenThis page performs the menu page display ON/OFF settings. The ON/OFF status for each item is indicated by displaying anasterix (E) or period (.) in front of the item on the screen.ItemMARKERVF DISPLAYCAMERA IDSHUTTERSPEEDSYNCHROSCAN!LEDMAIN FUNCTIONBATT/TAPEALARMVariablerange RemarksVFdisplayONOFFONOFFONOFFONOFFONOFFONOFFONOFFONOFFMARKER item user menu displayON/OFFVF DISPLAY item user menu displayON/OFFCAMERA ID item user menu displayON/OFFSHUTTER SPEED item user menudisplay ON/OFFSYNCHRO SCAN item user menudisplay ON/OFF!LED item user menu display ON/OFFMAIN FUNCTION item user menudisplay ON/OFFBATT/TAPE ALARM item user menudisplay ON/OFFON: This switches the display ON.OFF: This switches the display OFF.ENGENGENGENGENGENGENGENGThe underlined setting in the Variable range column indicates the preset mode.Menu screen display methodsUSER menu: Setting the MENU switch to SET displays the USER menu.ENG menu: Holding down the SHIFT/ITEM and UP buttons simultaneously and setting the MENU switch to SET displaysthe ENG menu.E: ON. : OFFSetting Menu ScreensLENS ADJ ScreenThis page performs the lens adjustments. The ON/OFF status for each item is indicated by displaying an asterix (E) or period(.) in front of the item on the screen.- L ENS AD J -¢ E F 2 . 8 AD J. F 1 6 AD J- M ENU SE L ECT 1 / 3 -¢ EM ARKERE VF D I SP L AYECA M ERA I D. SHUT TER SPEEDE SYNCHR O SCAN. ! L EDEM A I N FUNCT I O N. BAT T / TAPE A L AR M