Panasonic AJ-HD1400E Operating Instructions Manual

Also see for AJ-HD1400E: Mechanical Parts List

2Read this first!For AJ-HD1400P and AJ-HD1400Eindicates safety information.WARNING:z TO REDUCE THE RISK OF FIRE OR SHOCKHAZARD, DO NOT EXPOSE THISEQUIPMENT TO RAIN OR MOISTURE.z TO REDUCE THE RISK OF FIRE OR SHOCKHAZARD, KEEP THIS EQUIPMENT AWAYFROM ALL LIQUIDS. USE AND STORE ONLYIN LOCATIONS WHICH ARE NOT EXPOSEDTO THE RISK OF DRIPPING OR SPLASHINGLIQUIDS, AND DO NOT PLACE ANY LIQUIDCONTAINERS ON TOP OF THE EQUIPMENT.CAUTIONS:TO REDUCE THE RISK OF FIRE OR SHOCKHAZARD AND ANNOYING INTERFERENCE,USE THE RECOMMENDED ACCESSORIESONLY._THIS APPARATUS MUST BE GROUNDEDTo ensure safe operation the three-pin plug must beinserted only into a standard three-pin power outletwhich is effectively grounded through normal house-hold wiring.Extension cords used with the equipment must bethree-core and be correctly wired to provide connec-tion to the ground. Incorrectly wired extension cordscan be extremely hazardous.The fact that the equipment operates satisfactorilydoes not imply that it is grounded, and the installationis not necessarily safe. For your safety, if in any doubtabout the effective grounding of the equipment orpower outlet, please consult a qualified electrician.CAUTIONS:In order to maintain adequate ventilation, do notinstall or place this unit in a bookcase, built-incabinet or any other confined space. To prevent riskof electric shock or fire hazard due to overheating,ensure that curtains and any other materials do notobstruct the ventilation.CAUTION:THE AC RECEPTACLE (MAINS SOCKETOUTLET) SHALL BE INSTALLED NEAR THEEQUIPMENT AND SHALL BE EASILYACCESSIBLE. TO COMPLETELY DISCONNECTTHIS EQUIPMENT FROM THE AC MAINS,DISCONNECT THE POWER CORD PLUGFROM THE AC RECEPTACLE.IMPORTANT“Unauthorized recording of copyrightedtelevision programmes, video tapes and othermaterials may infringe the rights of copyrightholders and contravene copyright laws.”Operating precautionOperation near any appliance which generates strongmagnetic fields may give rise to noise in the video andaudio signals. If this should be the case, deal with thesituation by, for instance, moving the source of themagnetic fields away from the unit before operation.