50Setup menus (continued)VIDEO (continued)*1 Displayed menus may vary depending on the settings inmenu No. 25 SYSTEM FREQ. For details, refer to“Menus which are displayed” (page 32).*DW: With SD output (SD tape playback or down-convertedoutput)“_____” indicates the factory setting.No./Item Description of setting692*1UMID POSThis sets the line on which the UMID information is tobe superimposed.0000 BLANK0001 12L: :0006 17L: :0008 19Lz The line selected for the menu item No. 501 VITCPOS-1 and No. 502 VITC POS-2 settings cannotbe selected for this item.z The default settings are not restored even if theRESET button is pressed while holding down theSEARCH button.z Metadata recorded on the tape will be output givingUMID information first priority. When metadata isoutput, set to a line other than the originalmultiplexed line or select “BLANK.”693GAMMA SELThis selects gamma correction.0000 OFF :Gamma correction is not carried out.0001 GAMMA1 :This corrects video images shot with the cinegamma FilmREC mode of the Varicam to imagesof film quality (equivalent to Telecine 5 of HDGamma Corrector in AJ-GBX27G).0002 GAMMA2 :This corrects video images shot with the cinegamma FilmREC mode of the Varicam to imagesof film quality (equivalent to Telecine 6 of HDGamma Corrector in AJ-GBX27G).0003 GAMMA3 :This converts video images shot with the cinegamma FilmREC mode of the Varicam into theCineon curve appropriate for film recording.z Gamma correction is effective in the following conditions. When the VTR operation mode is VV (TAPE) and720p is displayed in the system format.However, during cross convert from 720p > 1080i,gamma correction is not effective for SD output.z When “ON” is selected, the GAMMA lamp on thefront panel is on at all times.z When this unit is turned to OFF, this setting returnsto "OFF." The setting of user default returns to “OFF.”z This item is not effective for 1394 output.256256512512768768 10231023TELECINE5TELECINE6CineonNo./Item Description of setting695* 1BLANKLINE* DWFor selecting the blanking ON/OFF for a period ofvertical blanking on video signals of the SD output.0000 BLANK :All the lines are forcibly blanked.0001 THRU :None of the lines are blanked.0002 MANU :Blanking ON or OFF is selected on a line-bylinebasis.z When setting “MANU,” if the STOP button ispressed, the screen shifts to the sub screen andthe ON/OFF setting for each line can be adjusted.Press the STOP button again to return to the mainscreen.z Lines that are selected as being blanked in thismenu item are similarly blanked before being up-converted when replaying the SD tape.Sub screen (59/60 Hz mode)00LINE 10&273:12LINE 22&2850000 BLANK :Forced blanking0001 THRU :No blankingSub screen (50 Hz mode)00LINE7&320:15LINE 22&3350000 BLANK :Forced blanking0001 THRU :No blanking
