Panasonic AJ-HD1400E Operating Instructions Manual

Also see for AJ-HD1400E: Mechanical Parts List

28Setup (initial settings) (continued)3 Incline the joystick up and down to adjust the cursor inthe default settings screen to the “LOAD” position andpress the joystick. The mode for this unit changes to theLOAD mode, the LOAD screen is displayed on the videomonitor, and the item name is displayed in the counterdisplay.4 Incline the joystick up and down to adjust the cursor inthe LOAD screen to the “FACTORY” position and pressthe joystick.z If this operation is made after moving the cursor to“FACTORY,” values for all menus except the SYSTEMmenu will return to the factory settings.z When the cursor is moved to “NO” and this operation isperformed, the display returns to the menu screenwithout restoring the factory settings.5 The confirmation screen is displayed on the videomonitor.z When the PLAY button is pressed, the unit returns tothe factory settings and the display of the menu screendisappears.z When the STOP button is pressed, the display returnsto the menu screen without changing the settings.Setting the user defaults1 Press the MENU button.A select screen for major menu items is displayed on thevideo monitor, and the names are displayed in thecounter display.2 Follow the procedure described in “Setting method usingthe on-screen menus” (page 27) 2–6 and adjust thedesired settings.3 Press the RESET button.The mode for this unit will change to the default settingmode, and the default setting screen will be displayed onthe video monitor.4 Incline the joystick up and down to adjust the cursor inthe default settings screen to the “SAVE” position andpress the joystick.The mode for this unit changes to the SAVE mode, theSAVE screen is displayed on the video monitor, and theitem name is displayed in the counter display.5 Incline the joystick up and down to adjust the cursor onthe SAVE screen to the “USER ¢ (ALL)” position (¢each value from 1 to 3.) and press the joystick.z When storing a set value other than SYSTEM menu inmemory, move the cursor to “USER ¢ (NOTSYSTEM)” (¢ each value from 1 to 3.) and press thejoystick.z To cancel the operation, move the cursor to “NO” andpress the joystick.SET-UP MENU ¢ NOFACTORYUSER1(ALL)USER2(ALL)USER3(ALL)USER1(NOT SYSTEM)USER2(NOT SYSTEM)USER3(NOT SYSTEM)SETUP-MENU FACTORY OK?YES/NOSELECT MODE¢ 0 ESCAPE1 LOAD2 SAVE3 PROTECTSET-UP MENU ¢ NOUSER1(ALL)USER2(ALL)USER3(ALL)USER1(NOT SYSTEM)USER2(NOT SYSTEM)USER3(NOT SYSTEM)