Panasonic AJ-HD1400E Operating Instructions Manual

Also see for AJ-HD1400E: Mechanical Parts List

7Features (continued)Cross-convert functionThe unit comes with a built-in cross-converter to enable1080i/59.94 Hz format signals to be converted into720p/59.94 Hz format signals or, conversely, to enable720p/59.94 Hz format signals to be converted into1080i/59.94 Hz format signals.Cross-convert with 1080i/50 Hz and 720p/50 Hz is alsopossible.HD analog component outputThis feature enables HD signals to be monitored withease.Gamma correction of cinema for filmThis feature corrects the image from a variable framerate camera in cinema gamma mode for film to an imagewith film quality.AC/DC operationThe unit supports AC supply voltages ranging from100V to 240V and DC12V power supply as well.Editing functionUsing the 9-pin serial remote (RS-422A), assembly orinsertion is allowed.(Only with 1080i/59.94 Hz, 720P/59.94 Hz, 1080i/50 Hz,and 720P/50 Hz)Encoder remote controller functionUsing the external encoder remote controller, eachsetting for the video output signal can be adjusted.Follow-on recording functionUsing the REC button and PAUSE button togetheractivates the auto back function, enabling the nextimage to follow on from the last image with nodisruptions in the continuity.On-screen menu settingsHighly detailed and individualized function settings canbe performed on-screen.Time codeThe unit is equipped with a built-in time code generator/time code reader (TCG/TCR). Since time code signalscan also be input from an external device, regenerationto an external time code is possible.Since the backup function using a backup battery isincorporated in the TCG (time code generator), timecodes during free-run operations are retained even if thepower of the unit is turned off.Joystick and variable speed playbackThe unit is equipped with a joystick (stick controller) foruse of the search function during variable speedplayback.In addition, the joystick allows convenient setting of theonscreen menu/time code generator.PF (Programmable Function) buttonThe unit is equipped with three PF buttons. Selectingthe three most frequently used setup menus, the menusettings can be changed with the buttons on the frontpanel.UMID information recording and playbackThis unit supports the recording/playback of UMID(Unique Material Identifier) information in the SMPTE330M standard. UMID information can be confirmedwith the diagnostic menu.VANC data recording/playbackVANC data packets that added to the Y stream of HDSDI can be recorded with the video signal. In addition,VANC data packets can be played back with the Ystream of HD SDI. This unit is capable of input andoutput through the IEEE1394 standard interface.AUTO REC FeatureThis unit can be connected to our camera recorderusing HD SDI signals. It is possible to remotely turn ON/OFF the recording feature of this unit by usingoverlapped commands.VTRs that do not support the recording/playback ofUMID information will not playback UMID informationcorrectly. In addition, when VTRs that do not supportrecording/playback of UMID information are connectedto this unit, UMID information will not be recordedcorrectly.