Panasonic AJ-HD1400E Operating Instructions Manual

Also see for AJ-HD1400E: Mechanical Parts List

4Read this first! (continued)For AJ-HD1400Eindicates safety information. DO NOT REMOVE PANEL COVERS BY UNSCREWING THEM.To reduce the risk of electric shock, do not remove the covers. No user serviceable parts inside.Refer servicing to qualified service personnel.Caution for AC Mains LeadFOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.This product is equipped with 2 types of AC mains cable. One is for continental Europe, etc. and the other one is onlyfor U.K.Appropriate mains cable must be used in each local area, since the other type of mains cable is not suitable.FOR CONTINENTAL EUROPE, ETC.Not to be used in the U.K.FOR U.K. ONLYIf the plug supplied is not suitable for your socket out-let, it should be cut off and appropriate one fitted.FOR U.K. ONLYThis appliance is supplied with a moulded three pin mainsplug for your safety and convenience.A 13 amp fuse is fitted in this plug.Should the fuse need to be replaced please ensure that thereplacement fuse has a rating of 13 amps and that it is ap-proved by ASTA or BSI to BS1362.Check for the ASTA mark or the BSI mark on thebody of the fuse.If the plug contains a removable fuse cover you must en-sure that it is refitted when the fuse is replaced.If you lose the fuse cover the plug must not be used until areplacement cover is obtained.A replacement fuse cover can be purchased from your lo-cal Panasonic Dealer.IF THE FITTED MOULDED PLUG IS UNSUITABLE FORTHE SOCKET OUTLET IN YOUR HOME THEN THEFUSE SHOULD BE REMOVED AND THE PLUG CUTOFF AND DISPOSED OF SAFELY. THERE IS A DAN-GER OF SEVERE ELECTRICAL SHOCK IF THE CUTOFF PLUG IS INSERTED INTO ANY 13 AMP SOCKET.How to replace the fuse1. Open the fuse compartment with a screwdriver.2. Replace the fuse.Fuse