Setup: Item Settings 123SetupThis menu is used for audio settings.* An underlined setting indicates an initial value.692 UMID POS00000001:0006:0008BLANK12L:17L:19LSpecifies the line that superimposes UMID data.NOTE:• You cannot select the same line as in menu No. 501 VITC POS-1 and No. 502VITCPOS-2.• Holding down the SHIFT button and pressing the RESET button will not restore thefactory defaults.• UMID data is output before recorded VANC data. To output VANC data, set UMID POSto a line other than that which superimposed the data or select “BLANK.”• During playback of native clip, UMID becomes BLANK.AUDIOItem SettingSettings and brief function descriptionFRNo.SUPERDISP.FRNo.SUPERDISP.701 CH1 IN LV00000001000200034dB0dB–3dB–20dBSpecifies the standard level for audio input (CH1).702 CH2 IN LV00000001000200034dB0dB–3dB–20dBSpecifies the standard level for audio input (CH2).703 CH3 IN LV00000001000200034dB0dB–3dB–20dBSpecifies the standard level for audio input (CH3).704 CH4 IN LV00000001000200034dB0dB–3dB–20dBSpecifies the standard level for audio input (CH4).706 CH1 OUT LV00000001000200034dB0dB–3dB–20dBSpecifies the standard level for audio output (CH1).707 CH2 OUT LV00000001000200034dB0dB–3dB–20dBSpecifies the standard level for audio output (CH2).708 CH3 OUT LV00000001000200034dB0dB–3dB–20dBSpecifies the standard level for audio output (CH3).709 CH4 OUT LV00000001000200034dB0dB–3dB–20dBSpecifies the standard level for audio output (CH4).Item SettingSettings and brief function descriptionFRNo.SUPERDISP.FRNo.SUPERDISP.
