126 Setup: Item SettingsThis menu is used for setting up the digital video interface.* An underlined setting indicates an initial value.This menu is used for menu settings.* An underlined setting indicates an initial value.DIFItem SettingSettings and brief function descriptionFRNo.SUPERDISP.FRNo.SUPERDISP.880 DIF SPEED000000010002S100S200S400Specifies the transfer speed of digital video interface output.0:100 Mbps1:200 Mbps2:400 MbpsNOTE:A DVCPRO HD format signal cannot be output when S100 is selected.882 DIF IN CH0000|006300640|63AUTOSpecifies input channels.0 - 63: These channels are fixed to assigned values.64: This channel is not fixed to assigned values.When the power is on, the input channel is initialized to 63.883 DIF OUT CH0000|006300640|63AUTOSpecifies output channels.0 - 63: These channels are fixed to assigned values.64: This channel is not fixed to assigned values.When the power is on, the output channel is initialized to 63.886 DIF CONFIG00000001|0255DFLT1|255Specifies the extension menu.Normally, DFLT is used.890 DIF AUD OUT00000001CH1+2CH3+4Specifies the output channels when the audio signals are in 4-channel mode and output inthe DVCPRO (25 Mbps) format and a DV clip is played back.0: CH1 and CH21: CH3 and CH4MENUItem SettingSettings and brief function description RemarksFRNo.SUPERDISP.FRNo.SUPERDISP.A00 LOAD0000000100020003USER2USER3USER4USER5Specifies user files loaded in USER 1.0: Loads the contents of USER 21: Loads the contents of USER 32: Loads the contents of USER 43: Loads the contents of USER 5NOTE:Pressing the MENU button when loading completes opens aconfirmation screen. Press the SET button to store the setting. Pressthe EXIT button to discard the change and retain the setting.Setting availablefor USER1 only
