– 129 –Chapter 6 Menu Operations — Menu listItem Description of settings[TIME STAMP] Selects whether to superimpose [DATE]/[TIME] information on shot videos.[ON]: Superimposes information set in the [DATE]/[TIME] item on video.[OFF]: Does not superimpose information set in the [DATE]/[TIME] item on video.f Factory setting: [OFF][DF MODE] Sets the counting method of the built-in time code generator.[DF]: Uses the drop frame mode.[NDF]: Uses the non-drop frame mode.f Factory setting: [DF][TCG] Sets the operation mode to advance the built-in time code generator.[FREE RUN]: Advances regardless of the operation mode.[REC RUN]: Advances when recording is in process.f Factory setting: [REC RUN]In native recording in variable frame rate mode, if the number of frames differs for shooting and recording,the time code operation will be [REC RUN].[TC PRESET] Sets the default value of the time code to record.[UBG MODE] Selects the user bits mode.[USER]: Selects the user bits value that has been set.[TIME]: Selects the local time. (hh, mm, ss)[DATE]: Selects the local date and time. (YY, MM, DD, hh)[EXT]: Records the user bits values currently input to the terminal.[TCG]: The value of [TCG] is recorded as user bits.[FRAME RATE]: Selects camera imaging information (such as frame rate).[REGEN]: Reads the value recorded to the card and continuously records that value.f Factory setting: [USER][UB PRESET] Sets user bits. Note that [USER] must be set for [UBG MODE].[VITC UBG MODE] Selects the VITC user bits mode.[USER/EXT]: When [UBG MODE] is [EXT], follows the value and when other than [EXT], records the uservalue set in [USER].[TIME]: Selects the local time. (hh, mm, ss)[DATE]: Selects the local date and time. (YY, MM, DD, hh)[TCG]: The value of time code generator is recorded as user bits.[FRAME RATE]: Selects camera imaging information (such as frame rate).[REGEN]: Reads the value recorded to the card and continuously records that value.f Factory setting: [USER/EXT][REC META DATA] [LOAD] Loads the metadata upload file saved to the SD memory card.[RECORD] Sets whether to add loaded metadata at a recording.[ON]: Adds metadata.[OFF]: Does not add metadata.f Factory setting: [OFF][USER CLIP NAME] Sets data to be recorded to [USER CLIP NAME].(When [RECORD] is [ON])[TYPE1]: Records setting values of the loaded data.[TYPE2]: Records the loaded data and counter value.(When [RECORD] is [OFF])[TYPE1]: Records the same value as [GLOBAL CLIP ID].[TYPE2]: Records the same value as [CLIP NAME].f Factory setting: [TYPE1][INITIALIZE] Deletes all loaded metadata and initializes.[PROPERTY] Checks and corrects loaded metadata.[LANGUAGE] Sets the language used to display metadata. (Only when [NTSC(J)] is selected as the region of use)[ENGLISH], [JAPANESE][CLIP]This menu is used when performing various tasks, such as playing back, deleting, copying clips, and editing metadata, while viewing the thumbnail ofthe clips displayed in the viewfinder or LCD monitor.These menu items are enabled when the thumbnail screen is displayed.Clip operations such as [DELETE] or [COPY] are enabled when the target thumbnail is selected.Some items are displayed only in specific situations such as in USB host mode or on the explorer screen.Item Description of settings[REPOSITION] Selects a clip to be displayed on the thumbnail screen.[ALL CLIP]: Displays all clips as thumbnails.[SAME FORMAT CLIPS]: Displays only the clips recorded in the same format as the system format asthumbnails. Clips recorded in the same format means that each item of [LINE&FREQ], [REC FORMAT],and [AUDIO SMPL RES] in the main menu → [SYSTEM MODE] matches the current setting status.Example) [1080-59.94i], [AVC-I100], [24BIT][SELECTED CLIPS]: Displays only the clips selected with the control stick as thumbnails. The thumbnailsappear in selected order.[MARKED CLIPS]: Displays only the clips with shot marks added as thumbnails.[TEXT MEMO CLIPS]: Displayed only clips with text memo data attached as thumbnails.[SLOT CLIPS]: Displays only the clips of the selected slot as thumbnails.f Factory setting: [ALL CLIP][DELETE] Deletes selected clips.
